Amency Trading
HVAC equipment
and components

Modular chillers

for smooth operation under high end conditions

Modular construction of chillers allows to use them one at a time or combine into blocks. Improved management and control tools make it much easier to interact with the building's climatic system. The design of the housing provides easy access to the internal elements of the chiller during maintenance.

Mono-block chillers

with screw compressor

Vigorous chillers with screw compressor are designed for air conditioning in large spaces or for cooling large volumes of liquids in industrial plants. Mono-block chillers in our catalog are characterized by a high COP factor at a sufficiently low noise and vibration level. Mono-block chiller will fully suit your special requirements.

Air compressor-condenser units

for central air conditioning systems

We updated line of compressor and condenser units. New models have several important design improvements. Among the new functions is the reception of an "emergency" signal by a "dry contact". Newer models have adjusted the compressor start-up time after receiving a start signal.

Fancoils

for heating or cooling rooms

Fancoils are used for heating or cooling places. The compact case contains the fan, heat exchanger and automation system. We supply two types of two-pipe fan coil units: cassette four-flow and duct low-pressure. These units are suitable for chiller-fan coil air conditioning systems. Fancoils work efficiently and as quietly as possible.

VRF air conditioning systems

to maintain a comfortable indoor climate

VRF air conditioning systems (Variable Refrigerant Flow) allow you to maintain a comfortable climate in several rooms at the same time. The multi-zone system is assembled from outdoor and indoor units of various capacities. 68 models of indoor units with capacity of 2,2 to 56 kW. Outdoor units with capacity of 8 to 90 kW.

Impellers

for duct fans

Impellers are backward curved and are highly reliable, energy efficient and long-life. They are capable to work under increased loads for over 30,000 hours. All impellers are equipped with thermal contacts with automatic restart. If the engine is overheated, the fan will turn off and automatically turn on after cooling down.

Impellers

polyamide fiberglass-reinforced

Highly efficient polyamide fiberglass-reinforced have backward bent blades and belong to the type of "free wheels". These devices are used in centrifugal fans and have high aerodynamic characteristics with low power consumption and low noise level. The impeller is mounted on an aluminum hub for easy mounting on the motor shaft.

Steel impellers

for powered-roof ventilators, channel fans and air handling units

Highly efficient «free» impellers with seven backward bent blades differ in accuracy and reliability of work. The improved aerodynamic design of the blades provides significant performance and noticeably reduces noise levels. High power and quiet operation - are ideal parameters for air handling units and ventilation systems.

Plate recuperators

keep the exhaust heat in ventilation systems

Designed to preserve exhaust heat in supply and exhaust ventilation systems. Heat energy is transferred from the warm extract air to the cold supply air through the plates, between which the air flows move. The heat exchanger inserts are made of corrosion-resistant aluminum and feature low aerodynamic resistance.

Rotary heat exchangers

for maximum efficient heat exchange

The most efficient device for storing heat energy in ventilation systems: it allows you to save up to 85% of the heat of the exhaust air. The rotary heat exchanger is a rotating drum made of corrugated aluminum strips. The upper part of the drum is located in the warm extract air area and the lower part - in the cold supply air area.

Heat-exchange units

to work with systems "liquid / air"

We supply a complete range of fin-tube heat-exchange units "liquid / air", used in most air conditioning systems of public and industrial buildings, industrial refrigeration systems and temperature control of process fluids. Our series oto blocks. 16 units can be combined into a block — depending on the specific cooling needs of the building.

Brazed plate-type heat exchangers

for industrial chillers

Brazed plate-type heat exchangers are used as evaporator in chillers. Refrigerant boils inside the heat exchanger and the refrigerant cools. Freons are used as cooling agents, for refrigerants - water or antifreeze glycol solutions. The heat exchange surface is a package of corrugated stainless steel plates.

Recycling pumps

with canned rotor

Recycling pumps - are silent canned rotor electric pumps. Electromotor stator part is fully shielded and the rotating parts are immersed in the fluid flow which contributes to their cooling during operation. The lightweight pump casing acts as a shielding shell that completely separates the interior from the water.

Axial fans

with low noise, smooth operation and reduced vibration

Many manufacturers of climatic equipment use our fans when assembling condensing units, chillers, dry coolers, remote condensers and other devices. Our portfolio contains models of axial fans with diameter of 200 to 800 mm. The compact design and low weight make installation and subsequent maintenance easy.

Controllers

for ventilation systems

Controllers help to effectively manage the operation of any refrigeration, heating, ventilation and air conditioning systems. The controllers support work with external control terminals and can communicate with other devices through serial ports, ports CANbus and Ethernet.

Three principles of Amency Trading

1. To think about the future

Amency Trading gives preference to equipment created using environmentally neutral and energy-saving technologies. We offer customers energy efficient devices that can deliver the best results with the lowest energy cost.

2. To save client's time

We solve logistics goals clearly and quickly. If client has chosen Amency Trading, it means that he will receive his equipment in the shortest possible time and at no extra cost.

3. Stand side by side

We strive to be closer to our clients and suppliers. Having the head office Cyprus, Amency Trading is focused on the EU HVAC market.

What refrigeration equipment does Amency Trading supply?

Our equipment works in systems of large shopping and office centers, industrial plants, restaurants and educational institutions.

Modular chillers

Mono-block chillers with screw compressor

Air compressor-condensing units

Fancoils

VRF air conditioning systems

Components of HVAC equipment in Amency Trading portfolio

Our components allow you to create Air Handling Units and automated supply and exhaust systems of the highest efficiency and reliability.

Impellers

Impellers made of reinforced polyamide

Steel impellers

Plate heat exchangers

Rotary regenerator

Heat exchangers

Brazed plate-type heat exchanger

Recycling pumps

Fans

Controllers

Why go with Amency Trading?

Because we know that even the best technology is only as good as the people behind it.

Contact Us